UA-84641492-1

863-292-0030​

 Call for a FREE estimate today! 

Florida Total Pavement Management, Inc.

FTP

Seal Coating

Sealcoating will provide a layer of protection blocking out the elements: water, oils, and U.V. damage. In addition, when applied to manufacturers’ specifications, sealcoating provides a slip resistant surface with a deep black finish that beautifies the parking lot or driveway. Sealcoats are typically bituminous based products or acrylics. The sealcoat is in a liquid formulation of one of the above emulsions, mixed with water, silica sand, polymer additives, and other proprietary fillers and solids. These products can be applied by brush, spray or squeegee. A regularly scheduled sealcoating program will more than double the life of the asphalt, saving you significant dollars down the line. Instead of having to pay thousands of dollars for new pavement, it is more cost effective to spend only pennies on the dollar per square foot to maintain.
Here is a list of seven facts you likely did not know about sealcoating!

1. Sealcoating protects and prolongs the life expectancy of asphalt pavement by filling surface damage and providing a protective layer to keep out damaging UV rays, vehicle fluids and water.

2. The low cost of regular sealcoating can save you money in the long run. A properly maintained and sealed asphalt surface has an extended lifetime and reduces long-term repair costs.

3. With exposure to the elements, asphalt pavement over time becomes faded in appearance. A fresh sealcoat application enhances the appearance of asphalt, making it look and wear like new.

4. Sealcoating is typically done using one of two application methods: spray or squeegee.

5. Sealcoating accelerates the melting process of snow and ice on pavement surfaces. This helps to protect against water penetration, rain, frost and snow damage.

6. To properly complete the sealcoating
 process, the air and pavement temperature is recommended to be at least 55 degrees Fahrenheit for the duration of application and for eight hours following the application.

7. Prior to pavement sealing, the asphalt surface should be cleared of all dirt and debris. In addition, minor repairs, like potholes and cracks, should be filled and vehicle fluids, like oil, should be properly removed.
For more information about our SealCoating maintenance and services, please contact us today at (863) 292-0030 .

We are pleased to offer a free on-site consultation and estimate.